This fits the X86 BrewZilla 65 Liter and lets you use a distilling column like our item C74 or C75 or any Still Spirits Distilling Columns. Includes a sealing silicone gasket.
Tip: The silicone sealing gasket can sometimes shrink over time, and fall out of the lid when you try to put it on your Brewzilla or Digiboil. To remedy this, stretch it like you would stretch an exercise band for 30 seconds, and then reinsert, working it in with both hands. It can be helpful to put a little glue (we have used a glue stick) on one side before you insert it into the lid, and then leave the assembly to dry upside down on a 65 Liter Brewzilla or Digiboil (with lid clamps in place) for 24 hours to prevent the gasket from ever falling out again.
Jan 20, 2025 by William
Q: Do you sell only the gasket for the 65L Digiboil lid? I couldn't seem to locate that product.
A: Yes, see our item L41
Sep 18, 2024 by Ryan Nadel
Q: Will this lid fit the Digiboil 65 L Kettle?
A: Yes
Dec 16, 2022 by John
Q: What is the width of the lid
A: 16.25" wide
Aug 09, 2022 by A.
Q: What are the dimensions of the hole for the column in the middle of the lid?
A: 47mm wide
Leaks without this seal
You need to buy the extender seal or it will leak. After I installed the extender seal I have not had any problems with leaks I hope this helps someone out... Brewzilla/Digiboil 65 Liter 24 Liter Boiler Extension Replacement Gasket https://www.williamsbrewing.com/Home-Brewing-Equipment/Wort-Making-Equipment/Brew-Pots-And-Accessories/BrewzillaDigiboil-65-Liter-24-Liter-Boiler-Extension-Replacement-Gasket?srsltid=AfmBOorOi30C9WbEdZMQ2zyQSbZe2S3s1UY6i3zNfV5YeemIfxVBaVNk
Brewzilla 65 Liter Still Lid
It is true that the gasket is a problem; however, in lieu of the supplied gasket I filled the gasket cavity on the bottom side of the lid with food grade silicone. Let the silicone cure before using; no problems now...!
Gasket is a pain
Lid would work well except the gasket (which is the most important part) does not and mostly won’t stay in the channel it’s supposed stay in. Tried using glue like the website suggested and the steam made the glue ineffective. Would be a good product if the gasket was a little bit bigger.