The Brewzilla Gen 4.1 features a RAPT compatible controller, which means you can track, record, and monitor your beers online through the RAPT portal at https://app.rapt.io. It SHIPS FREE to lower 48.
• Recirculation Pump
• Mash & Boil, and Chill
• Mash up to 20 pounds
• Distilling Options
• Runs on 220 volts, see picture of the NEMA 6-30R 220 volt plug above
• Included Wort Chiller Coil, optional Wort Chiller Tubing Kit
• Detachable RAPT WIFI Controller
• New Recirculation Pipe Sight Glass
The RAPT portal has many features: you can see a record of your previous brews, remotely control the unit and turn it on to preheat from your phone, alter temperature settings from your phone, and more. Custom mash temperature profiles can be created and stored, alarms can be set if you want it to remind you when to add hop stages, or tell you when the strike water is heated and it is time to mash. All functions go through the RAPT controller; there are no longer toggle switches to control things like wattage and the pump.
Concave Draining Base
The base is dished towards the center so it drains all the wort. No need to tilt the unit to extract every drop of wort.
Larger Capacity Malt Pipe with Two Positions
The high flow malt pipe is 20% larger than the old, meaning the 35 Liter Brewzilla can now mash up to 20 pounds of crushed malt per batch. This is great for high gravity beers, and enabled by the new concave base drain, which gave the designers more room for a malt pipe. The malt pipe also now has two positions, so you can lift it halfway up and twist for smaller batches, or lift it all the way like before for full batches. This is the latest version, with side perforations in addition to bottom of the basket perforations.
Easy Access Pump
The bottom cover has been reduced in size to only house the sensitive electrical components. This leave the pump easily accessible in case you need to clear a clog or replace a drain hose.
The Gen 4 Brewzilla with Pump from KegLand features a recirculation pump, as well as a false bottom and grain pipe to both protect the pump from clogging, and hold the crushed grain above the bottom for good wort circulation. The Unit holds 9 gallons, although we do not recommend boiling more than 6½ gallons (perfect for 5-6 gallon batches). The grain pipe (basket) holds up to 20 pounds of crushed malt, and a pipe with included silicone hose on top feeds the recirculated wort from the pump evenly on top of the grain bed. Dimensions: 12” by 12” by 25” with the grain pipe removed.
This 220 volt unit two heating elements for a total 2400 watts of heating power, a 1900 watt main element and 500 watt secondary element.
Click HERE for an instruction manual
Note: Unlike in the video below, the mash basket does not have steps in the center, and the mash basket cannot be suspended halfway as a result in the boiler.
Kegland Item KL27434
Click HERE for product instructions
You can be the first to ask a questions.
Brewzilla 35L Gen 4 220v
I have owned a Brewzilla Gen 3.1.1 (110v) for a couple of years and I have brewed over 70 - 5 gal batches with it. While I was satisfied, it never had a robust boil. Had an electrician install a 220v circuit in my garage and bought this Gen 4. Made 1 batch last week and WOW, what a difference. Still tyring to figure out all of the RAPT controls, so the brew was mostly manual. The boil was very robust and zero wort scorching (used the optional heat exchanger)! If this fits your budget, I highly recommend that you consider it. I'm certainly impressed!