Mar 16, 2023 by Tony

Q: Can this be used as an upgrade to the gen 4 Brewzilla by cutting the plug off the end and wiring it in place of the stock pump?

A: No, it will not fit.

Dec 02, 2022 by Matt

Q: What is the height of the pump inlet from the ground and how high above that do you recommend the kettle outlet be?

A: From the center of the inlet to the ground is 1 7/8" tall. The Kettle outlet just needs to be higher than the pump inlet, so it can be 2" from the ground or higher.

Apr 01, 2022 by Jim

Q: Can you pump hot maple syrup with this 219 degrees F?

A: While the pump can handle the temperature, we have never tested it with syrup. The thickness and the fact it is sticky could cause the magnetic drive to stall and stop pumping.

Oct 21, 2020 by Chris

Q: Can this pump be lubricated? Mine is seized and only barely turns by hand.

A: Try removing the head and checking for obstructions. If the impeller is damaged it can restrict movement. A new impeller is part # X11 if this is not under our one year warranty.

Mar 28, 2019 by Chad

Q: Do you have a recommended cleaning procedure for this pump? I.e. do you run a cleaner through and then a sanitizer? Do you recommend a specific cleaner or sanitizer?

A: Always rinse out your pump so soon as you are done running wort through it so the wort won't have time to dry inside making cleaning more difficult. Follow that with cleanser, clear water then sanitize. As far as cleansers go the best way to clean the pump is with TM Desanamax (A36) as this cleanser will tell you when your pump is clean inside. When you mix it with clean water it turns purple. Then green or yellow if it detects any organic matter. When it runs purple again, your pump is clean. Flush the pump with clean water until it runs clear then sanitize with Star San HB (A43 or A44) or Saniclean (A48) and allow it to dry.

Ask a Question